LENOVO TAB (TB2-X30F) Complete Flashing Guide

           Lenovo Tab (TB2-X30F) Complete Flashing Guide

If Your Lenovo Tab (TB2-X30F) Stuck At Startup Logo. And Not Boot Up Normally. Or If Your Lenovo Tab (TB2-X30F) Locked With Uber App.
Follow This Flashing Guide To Restore Your Tab In Normal State.
Follow These Steps:-

1. First, You Have To Download The Lenovo (TB2-X30F) Firmware In Your Computer. For Download Firmware:- Click Here
And Download QFIL Download Tool:- Click Here

2. After Download Firmware Extract It.
3. After Extract Firmware Now Connect Your Tab In Download Mode.
4. In Power Off State Press & Hold Both Vol+ & Vol- Keys And Insert USB Cable. Windows Will Detect Your Tab. After That Install Qualcomm Driver If Needed.

5. Now Open QFIL Tool. After Open Tool Select Build Type (Tick On Flat Build). After That Select Programmer Click On Browse… And Select (prog_emmc_firehose_8909_ddr.mbn) File. And After That Select Build Click On Content… (rawprogram0.xml & patch0.xml) File. After That Click On Download Option. See the image below.

6. Firmware Download Process Will Complete In 5 To 10 Min. After Complete Firmware Download Process. Turn On Your Tab Manually By Pressing & Hold Power Key For 2 To 4 Min.
7. Now Your Lenovo Tab (TB2-X30F) Is Now Ready For Use.  
If You Want To Watch Video Tutorial:- Click Here

Share For Helping Others!

Leave a Reply

Your email address will not be published. Required fields are marked *